US Mine Clearing Team and US Engineers from AB Miniatures

Oh yes, AB Miniatures… pretty much everyone into Napoleonics and WWII has probably heard about them and if so, had a bit of a shock after realizing how much they ask for their minis. Personally, I’ve been lured by their Napoleonic sculpts on several occasions, but luckily choose the 6mm path in that department. When it comes to WWII… 20mm is my scale of choice and now that I’ve decided to commit myself to Chain of Command, the siren call of those AB minis was too hard to resist.

Now, my first AB minis are ready for gaming table. The price is still making me grind my teeth, but I won’t lie, I find those sculpts absolutely lovely! Crisp molds, very dynamic and useful poses, faces with character despite the tiny scale! As a consequence, painting them was pure joy and I probably spent a lot more time on them than I should.

So far, I’ve finished two sets. First of them is US Mine Clearing Team, consisting of six figures.

The other set is US Engineers, consisting of eight miniatures.

Paint job is a mix of recommendations from net, painting guides and my own ‘best guesses’. All paints are Vallejo Model Color unless otherwise specified.

• Jacket and leggings – 60/40 mix of 884 Stone Grey and 821 German Cammo Beige
• Webbing – 819 Iraqui Sand
• Sachels and other engineering equipment – 821 German Cammo Beige
• Helmets, flamethrower, bangalores – Game Color 64 Yellow Olive
• Trousers – 873 US Field Drab slightly tinted with 941 Burnt Umber
• Boots – 846 Mahogany Sand
• Rifle belts – 940 Saddle Brown

Najewitz Little Farmhouse and barn–ready for action

Seems like every single post I make here starts with “It’s been a while since the last post…”, but this time around it’s really been a while since the last post! Funnily enough not because stuff isn’t moving forward on wargaming front, mind you! The fact is that April, which didn’t even earn a single post here, was quite busy and fruitfull, thank you very much. But “real life” made it impossible for me to make any pictures and let’s face it, what’s the point posting something without pictures, right?

And so, here are finally some pictures, this time around from the finished Najewitz buildings that figured prominently and ‘in natura’ in my previous post. By now, they’re finished, painted and ready for featuring in those Chain of Command games I keep planning for.

Since those buildings are no longer available on the market, I will limit myself to saying that they’re very nice, but also very labour-intensive – couple of hours at the minimum needs to be spent on cleaning them up, glueing, sanding and filling. “Ready for deployment out of the box’ they’re not. But… once finished, they do look quite presentable and I look forward to putting them on the gaming table!

As for their preparation, they’re certainly a learning experience. I’ve cut some corners this time around and, after priming them in grey, I dealt with the interior quickly and efficiently with help of light cream paint in a spray can from Montana’s Gold product line. I’ve recently remembered about the existence of Montana and their spray cans and now I absolutely adore them. For those unfamiliar with the company, they produce spray cans for grafitti paintings. Wide range of colors, matte finish and very durable. Two coats were more than enough to paint the inside of my buildings. If you can find them, give them a try!

Exterior of the houses was painted with more traditional paints and techniques. Humbrol enamels were used on the stone barn. I tried to vary the shades of brown and do some wet-blending, but as usual I’ve chickened out in regard of palette and the end result is pretty uniform and boring. Oh well, maybe next time… The farm house was painted with… acrylic wall paint bought at local DIY shop. Perfect coverage and a whole lot cheaper than stuff from GW, Vallejo and such! I finished everything off with some Vallejo washes, just to dirt things up a bit.

Here are the promised pics, hope you’ll like them!

Najewitz French Café and garage

Couple of posts back I’ve posted a short note about starting work on a couple of 1/72 buildings from Najewitz. Well, they’ve been done for quite some time by now, I just haven’t had time to take the snapshots. And here they are!

My verdict about the kits? Construction was pretty straightforward, although I didn’t manage to get the walls to fit with each other 100 percent. In fact, the ‘hacksaw’ joints were quite prominent and even with generous dose of filler I didn’t manage to get perfect result. I have however to clarify that the issue could have been self-inflicted. Initially I tried to glue the parts together with plastic glue and was a bit surprised when it had no effect whatsoever. In slight panic mode, I switched over to super-glue and that worked much better, but I rushed the job and wasn’t very careful with ensuring 90 percent angles between individual walls.

Most problematic part turned out to be the roofs, or more precisely, getting the right angle there. I completely botched the job with garage roof and as a result there is a significant gap in the “joint” between the roof and the building.

Painting consisted of couple of steps. After a base coat of black from a spray can (big mistake, which I will not make again), I painted both buildings with actual acrylic wall paint. Let me tell you, those sample cans from DIY shops are worth their weight in gold, when compared with Vallejo or GW paints! Details like doors and window frames were painted with craft acrylics. Roof of the café building was airbrushed with Tamiya brown paint, while that of garage was painted with some off-green Vallejo paint. Not much consistency with techniques here…

As first step in weathering process, I gave both buildings a generous wash of Vallejo’s dark brown wash. Next, I used enamel washes to do some dirt and rain water streaks. Drain pipes were darkened with a couple of layers of different dark brown and grey washes.

The big although perhaps irrelevant question (after all, Najewitz isn’t selling these kits anymore) – are they any good and are they worth the cost? As for “any good”, you may judge for yourself, but personally I’d say ‘heck, yeah!’. They’re perfect for any WWII scenario in France or neighbourhood! In regard of value for money; here I must say that it kind of depends. You get two nice, but relatively simple kits for 25 Euro. With a bit of effort and investment of 6-8 hours I could probably crank out something similar on my own and here’s the big question – is the price worth a working day? To be honest, I don’t know.

Anyway, here are the pictures, hope you enjoy them.

Double-dipping in the hobby pool

Another sidestep into my other hobby. This time it’s a Messerschmitt 210 from Italeri, 1/72 scale (as always). A problem-filled kit, with sligh, but annoying fitting problems which cost a bit additional construction time. Still, once I was finished with it, I was a bit surprised over how much I liked it. Mind you, the real thing apparently gave Göring an ulcer (which, when you think about it, should really count as a positive characteristic!), but it based on lines alone, it’s a really beautiful airplane!

Anyway, here’s a couple of pics of my take on this kit.

1/72 Normandy buildings from Najewitz Modelbau

Well… this post was supposed to be a short and sweet introduction to buildings from Najewitz Modelbau, but I’m afraid I will kick it of with a rant. Over last couple of years, I’ve bought a grand total of five sets from these guys and was extremly pleased with the stuff I’ve received. Beautiful buildnings, minimal assembly, prompt delivery times. Of course when the packages from them arrived, I admired my new ‘precious’ and then placed them in my ‘stash’. Today however, I’ve came to realization that if my Chain of Command project is to ever lift of ground, I would have to force myself and actually put couple of these buildings together. With a sigh (another terrain project!), I dug up the boxes from Najewitz and picked one of the house at random to work with.

After I have washed the components and took the snapshots, I wanted to take a quick look at Najewitz’s site to check what they called this particular item. Well, the site is still there… but all the stuff they sold is gone. From what I can understand, the firm has switched focus and is now selling files with design plans for 3D printouts of buildings. I won’t lie, I am quite annoyed by this move. I get it that a company is free to do as it pleases when it comes to its activities. But at the same time, making lateral move like this, without much of a warning, is leaving me at least in a bit of a lurch.

On with the ‘first look’ at one of Najewitz 20mm Normandy buildings then, although I’m not sure there is much point in it anymore since it and all of its brethren seems to be no longer available on the market. Anyway… the building I will be working with is actually a set of two buildings – a café and a small garage. They’re made of plastic. The walls are about 5mm thick, while the roof sheets are bit thinner, maybe 3mm. There is minimal flash in some of the windows, but otherwise the casts are very crisp.

Construction should be simple – one just has to put the ‘teeths’ together and ensure that the angle between the walls is 90 degrees. The fit of components is pretty good, but I suspect some filler will be needed to hide the ‘tooth’ outlines at the corners. Roofs may be a bit more tricky and will probably need some sort of reinforcement, as I intend to make them removable.

Timecast latex rubber rivers

Since this article is a ‘pure’ review of a commercial product, let’s start with the mandatory declaration of independence – I am in no way associated nor sponsored by Timecast Models. Thus, this review is an expression of my personal opinion as private consumer and wargamer.

Allright, with these rather official preliminaries completed, let’s get on with it.

Couple of years ago I’ve decided to ‘migrate’ my terrain from GHQ-s styrofoam hexagons to ‘conventional’ DIY terrain boards. Major reason for this move was my wish to simplify the setup and keep as much of it (hills, woods, rivers, ditches, hedhes and so on) as removable, flexible stand-alone pieces.

At the same time, Timecast Models released their roads and rivers system, made out of silicone rubber. That in itself wasn’t anything spectacular, many companies make similar terrain pieces. But two things caught my attention in regard of this particular product range. First, Timecast Models made rivers came in four different widths that could be connected together with dedicated ‘connector’ bits into integrated waterway system. Second, Timecast complemented their product with variety of resin bridges and fords. In other words, their product line struck me immediately as a complete and expandable solution for waterways. And that, ladies and gents, isn’t something one can often say when it comes to wargaming terrain.

My first (and so far only) order included enough straight and meandering river sections of smallest width to provide continous river of about 2 meters. I’ve also ordered all available sets of fords, connecting bits and river bends. Samples of what came in the box are shown below.

As can be seen in the pictures, the rivers and fords are made of brown, flexible rubber-like material. You can easily cut and trim individual pieces with a pair of scissors.

Before painting and flocking, I washed the whole lot in lukewarm water with some dishwasher detergent. Every bit was gently scrubbed with a toothbrush, rinsed in cold water and left to dry. It was probably a bit of an overkill, but better be overly cautious than running into problems later on with some chemical residues left-over from mouldning process messing with the paint.

On with the painting then… I kept things extremly simple here and started with painting the riverbanks with dark-brown acrylic wall paint from Flügger. Water surface was painted with dark-blue acrylic artist’s paint from Amsterdam. I know, I know, not very realistic, but I like my rivers and ponds blue. Next, I tried to add some shine to the water surface with help of blank acrylic varnish, but I can’t say this step had a lot of effect. Finally, I’ve stuck some flock on top of river banks with thinned PVA glue. And that was that.

Couple of comments about painting process. First and foremost – the paint seems to stick to the rubber material used for these terrain pieces… and stays there! This is more than I can say about my silicon roads from Total Battle Miniatures. Yes, you can peel it of if you scratch it forcefully with fingernail or something sharp, but the paint doesn’t peel of on its own if you bend the ‘bands’. That’s a good thing. Second, the flock I’ve glued on with the PVA will probably rub off with time. But that’s no biggie, I’ll just reflock if I feel it’s necessary. Finally, I feel it’s a good ocassion to repeat the advice I keep hammering on this blog – if you value your money, do not use modelling paints for your terrain pieces. Vallejo, Army Painter, Games Workshop, it doesn’t matter which brand you use, their pricing is insane and wasting their product on terrain pieces will cost you a pretty penny. For large terrain pieces, use artist’s paints that come in huge tubes, or better yet, take a trip to your DIY market and find their paint section. They usually sell half litre sample jars that will last you forever, for price of two GW paint pots and carry color ranges that will make all modelling paint ‘systems’ look puny.

Oh yes, one last thing. I’ve included couple of resin bridges that were suitable for those rivers. I still haven’t painted them, but I think it’s only fair to included couple of snapshots of how they fit together with the rest of  the ‘system’.

Overall, my initial impression of Timecast’s river system is very positive. They’re made of what seems to be durable, flexible material. Acrylic paint and varnish sticks well on them and they look the part once painted. Addition of dedicated bridges and possibility to integrate different river widths into single ‘system’ is in my opinion a stroke of genius and was the factor that convinced me to go with this product. So, for the moment at least, I can’t but enthusiastically recommend it to anyone in need of simple but effective representation of rivers on wargaming table.

1/72 US Heavy Weapons set from Plastic Soldier Company– painted

Took me just two months, but they’re now done. Final impression after putting some paints on them? Neeeaaah… my initial impression hadn’t changed that much – they are cheap and they are adequately detailed for a wargaming table. It should be enough and yet, somehow, it isn’t.

Oh well! Judge for yourself, what do you think?

When Wargamer’s Magpie Syndrome pays off

Let’s face it, we all suffer from it to some degree – new period catches our interest, a new range of minis is released, a book or a movie gives us ideas for a cool scenario or campaign. When this happens, small parcels start being delivered by postal service to our doors. I’m sure that vast majority of wargamers is far more disciplined than I am and manages to put contents of those parcels onto wargaming table within a couple of weeks… In my case though, these newly acquired ‘treasures’ are as often as not inspected, admired, put in some box and then doomed to linger, half-forgotten, in my basement storage room. Sometimes for years, sometimes for decades.

Every once in a while though, a small miracle happens and my interest in the period or theme awakens again. As for example, with the WWII skirmish due to ‘Chain of Command’ ruleset. As I started to seriously consider putting together last week’s test scenario, I realized that I really didn’t have much terrain suitable for such game. And then I remembered… sometime in late ninties I’ve bought a shedload of bits and pieces from Gamecraft Miniatures. It took some effort, but after a small archeological excavation I’ve managed to dig up a bag of resin walls and stones. I am pretty sure that a dozen or so resin buildings are hiding somewhere, so the search is not yet complete!

Anyway… getting these walls and stone formations ready for a game seemed like a plausible goal over a period of two weeks I had for preparation of the game. In ‘raw’ form, the terrain pieces are made of off-white resin. So the first step was to wash them in luke-warm water with some detergent. An old-fashioned toothbrush is quite useful for this task.

While the resin lumps were put aside to dry, I started to wonder how to approach this particular painting job. Normally, I start with a coat of Vallejo (or these days Plasticoat) grey primer and then get to work with acrylics. But in this case we’re were talking about stone. In nature, both stone walls and outcrops have a lot of subtle tonal variation, but in a limited color range. Browns or greys shift in saturation due to varied exposure to elements – to get a realistic effect, I would have to do a lot of blending and washes. And I have to admit, after all these years blending with acrylics is still a challenge for me. And so, I arrived to a somewhat surprising decision – this time around I would go ‘old school’ and dust off my old Humbrol enamel pots!

Enamels may be an unfamiliar medium for ‘younger’ wargamers, but they were pretty much all we had before acrylic ‘revolution’ of early ninties. They are not water-solvable and need either white spirits or terpentine to thin (and wash the brushes). They stink (especially some of the older Humbrols can make your nose hair curl in panic as soon as the lid is off) and they take forever to dry. So when acrylics arrived on the scene, enamels didn’t stand a chance. But… this last drawback – long drying time (and I speak about several hours) is under certain circumstances a blessing in disguise. It allows for blending and lifting off techniques (that’s what I call painting and then ‘taking off’ paint from painted surface) that one only can dream of with acrylics.

I started the painting process with an uniform coat of Humbrol 98 for the stone formations and Humbrol 118 for the stone walls. Once this was done, I let the pieces dry over night.

For stone formations I next proceeded with building up several thin layers of 72 and 187 mixed in different ratios. Darker shades were applied all over the stones. I did however try to let the dark base color to get through here and there. That’s where ability to pick off the paint with the brush was very useful. As I successively lightened my mix, I blended it with underlying layers in the areas that would be exposed to sunlight and elements. For final highlights I added some light grey Humbrol 64. Addition of light neutral grey desaturated the mix. It was added to the sharp edges and surfaces that were visibly raised. Normally this step would be done with drybrushing technique. However, since enamels don’t dry in a blink of an eye, I had plenty of time to do proper blending.

I did however switch over to drybrushing once I started working on the walls. Blending of individual stones would simply take too much time. So a heavy drybrush of Humbrol 26 was applied to the raised stone areas with a flat brush, followed by lighter passes of Humbrol 187 and 72 in irregular patterns.

Next, I returned back to the stone formations. I dilutted heavily the dark brown Humbrol 98 with white spirits and used it as a wash, applying it to lower parts and around crevices of stone formation. Once done, I left everything to dry over night.

Last painting step consisted of a wash with Vallejo’s acrylic washes, which I applied on the walls in an attempt to bring out the detail of the walls. I mixed together Black and Oily Earth and applied it all over the walls. Not entirely happy with how this step turned out, but it did add a bit of variation in color tonality.

Once everything was dry, I flocked the terrain bits with turf and foam clumps from Noch/Woodland Scenics.

Overall, I am not entirely happy with how the walls turned out – the reddish tone of Humbrol 118 that I used as base color looks a bit unnatural to me. But from a couple of meters away the walls look perfectly serviceable. On the other hand I am totally delighted over the visual effect of stone formations. The stones have subtle but clearly visible shifts in color, which is exactly what I was after and the dark brown wash that was added in spur of the moment did a lot for creation of ‘natural’ look.

It was a very happy return to an old medium of enamels, which I’ve neglected almost completely over last two decades. For the future, I will have to remember about their special characteristics and positive properties.